Key Facts

Product features

  • Industrial strength
  • Concrete reinforcement
  • Highest chemical resistance
  • Suitable for underwater applications
  • For fixations in hammer- and diamond drilled holes
  • Flexible working time even at elevated temperatures
  • No shrinkage

Possible uses

Pure Epoxy Anchoring works in solid materials and is preferred for anchoring reinforcement bars and for post-installed rebar applications.

Epoxy Technology
Hardened 2-component epoxy resin injection mortars are characterized by very good thermal and mechanical properties and an outstanding resistance to chemicals. There is no shrinkage due to hardening. Good compound properties achieve outstanding load values in diamond-drilled holes and larger annular gaps.s

Key notes

Make sure to read the application and safety instructions given in our Technical Data Sheet and Safety Data Sheet.

Solid Material

Application in solid material:

1. Drill a borehole with a percussion drill.

2. Clean borehole by blowing and brushing 4 times each.

3. Screw mixer to the cartridge.

4. Squeeze out and remove compound until a homogeneous grey color appears, then apply (approx. 10 cm).

5. Starting from the bottom, fill ¾ of the borehole with mortar.

6. Using a turning motion insert the reinforcement bar or threaded rod.

7. Visual check of mortar filling and remove excess mortar.

8. Observe correct hardening time. Please note, that curing time strongly depends on environmental temperature. You will find the correct curing time for each product in the Technical Data Sheets.

9. Install fixing element and apply with torque.

Downloads

Hollow Material

Application in hollow material:

1. Drill a borehole without percussion drill.

2. Clean borehole by blowing and brushing 4 times each.

3. Insert sleeve.

4. Screw mixer to the cartridge.

5. Squeeze out and remove compound until a homogeneous grey color appears, then apply (approx. 10 cm).

6. Starting from the bottom, fill sleeve completely with mortar.

7. Using a turning motion insert the anchoring element.

8. Observe correct hardening time. Please note, that curing time strongly depends on environmental temperature. You will find the correct curing time for each product in the Technical Data Sheets.

9. Install fixing element and apply with torque.

Downloads