Key Facts

 Product features

  • German and French certification for anchoring in hollow bricks
  • High strength
  • Fast curing
  • Solid & hollow materials

Possible uses

Polyester Resin Anchoring works in solid and hollow materials and places where expandable dowels cannot be used.

Polyester Technology
Polyester is the classic reactive resin mortar used for the production of 2-component mortars, whereby both unsaturated polyester resins dissolved in styrene and styrene-free unsaturated polyester resins with styrene-related monomers as a reactive solvent are used.

The Pattex CF800 mortar based on polyester is developed for the structural chemical bonding to fixate mechanical elements into a mineral construction.

Key notes

  • Make sure to read the application and safety instructions given in our Technical Data Sheet and Safety Data Sheet.

Solid material

Application in solid material:

1. Drill a borehole with a percussion drill.

2. Clean borehole by blowing and brushing 4 times each.

3. Screw mixer to the cartridge.

4. Squeeze out and remove compound until a homogeneous grey color appears, then apply (approx. 10 cm).

5. Starting from the bottom, fill ¾ of the borehole with mortar.

6. Using a turning motion insert the reinforcement bar or threaded rod.

7. Visual check of mortar filling and remove excess mortar.

8. Observe correct hardening time. Please note, that curing time strongly depends on environmental temperature. You will find the correct curing time for each product in the Technical Data Sheets.

9. Install fixing element and apply with torque.

Downloads

Hollow material

Application in hollow material:

1. Drill a borehole without percussion drill.

2. Clean borehole by blowing and brushing 4 times each.

3. Insert sleeve.

4. Screw mixer to the cartridge.

5. Squeeze out and remove compound until a homogeneous grey color appears, then apply (approx. 10 cm).

6. Starting from the bottom, fill sleeve completely with mortar.

7. Using a turning motion insert the anchoring element.

8. Observe correct hardening time. Please note, that curing time strongly depends on environmental temperature. You will find the correct curing time for each product in the Technical Data Sheets.

9. Install fixing element and apply with torque.

Downloads